SPECIFICATIONS

Eyelash kit include:
1 x perm
1 x fixation
1 x nutrition
1 x cleanser
1 x glue
1 x clean tool
2 x lash tints (black & brown)
10 x micro applicators
5 x brushes
Eye pads:3 pairs
Lift pads: 5 pairs(S,M,M1,M2,L)


Usage of Eyelash kit:
Step 1: Use the #4 Cleanser to remove grease, dust and residual cosmetics from your eyelashes.
Step 2: Put the eye pads over the lower eyelid.
Step 3:Choose lift pad that suits your eyelashes.
Step 4: Apply the glue to the back of the lash lift pads, wait for 20 seconds, then put them on your eyelids. As close to your lash line as possible.
Step 5: Apply the glue to the front of the lash lift pads. （Tip: No need to put too much glue, it needs to wait for 30-60 seconds then put the lashes on.）
Step 6: Use clean tool to lift the lashes from the root back onto the pads. The lashes should be aligned and not crossing each other.
Step 7: Apply Perm #1 on your eyelashes and wait 10 to 12 minutes.
Step 8: Apply Fixation #2on the eyelashes and wait 10 to 12 minutes to fix the eyelashes.
Step 9: Apply Cleanser #4 to the eyelashes and remove the glue from the eyelashes.
Step 10: Apply 01/02 eyelash tint on lash from base to tips, fully cover every lash for 25-30 minutes.
Step 11:Apply Cleanser #4 to the eyelashes and remove the excess eyelash tint from the eyelashes.
Step 12: Use nutrition #3 to nourish your eyelashes.

Eyebrow kit include:
1 x perm
1 x fixation
1 x nutrition
1 x cleanser
1 x cling film
2 x mini combs
2 x brow tints (black & brown)
3 x clean tools
5 x micro applicators
5 x brow brushes

Usage of Eyebrow kit:
Step 1: Using the #4 cleanser lotion to clear off the oil dust ,and make up residue on brows.
Step 2: Brush brows by Y shape brush.
Step 3: Apply#1 perm lotions on brows covering the cling film on brows for 3-5 minutes.
Step 4: Using the #4 cleanser lotion to clear off the perm lotion residue.
Step 5: Apply#2 fixation lotions on brows, covering the cling
film on brows for 3-5 minutes.
Step 6: Remove cling film, using the #4 cleanser lotion to clear off all perm residue.
Step 7: Apply eyebrow tint on eyebrow evenly, avoid direct contact with skin around eyebrows. wait for 20-30 minutes, then wash off all excess residue thoroughly.
Step 8: Finally, apply #3 nutrition lotions to repair the eyebrow.